Fireware XTM v11.5.1 CSP3

For XTM 2050, 1050, 8-series, 5-series, 3-Series, 2-series
Appliance Build # 334971

WSM v11.5.1 or higher is needed to manage a Firebox running Fireware XTM 11.5.1 CSP.
11.5.1 CSP releases are cumulative


Resolved Issues:

CSP1: (Build # 332728)
BUG62883: warning information in start information
BUG64465: Kernel crash on XTM8 EIP:0060:[ e0f1e711] Tainted: P VLI
BUG63683: Stack trace on XTM8 A/A Master Firebox after 3 days 
BUG63588: no default route added after configure external interface. 
BUG62535: the link monitor doesn't work for ping target
BUG64251: When 10-20Mbits/s UDP traffic pass through BOVPN tunnel, kernel call trace and master crash. 
BUG64280: SNAT load balance - server states toggle between "online" and "offline" 
BUG63136: HTTP downloads stalling with HTTP proxy and IPS enabled
BUG64292: Dynamic NAT per Policy needs Secondary IP listed on Interface which is NATing

CSP2: (Build # 333437)

BUG63764: If the packet size is between 1507 and 1538, it can't pass through the BOVPN
BUG63231: increased cluster sync timeout to avoid synchronization failures when a module in the Firebox is  slow to respond.  
BUG64589: ICMP not being redirected anymore after upgrading from 11.4.2 to 11.5.1 

CSP3: (Build # 334971)

BUG64440:  Static Arp entries are lost in Firecluster Active / Active when external interfaces goes down and coems backup
BUG64898: Updated sdk from AVG to prevent scand crashing on archive file scanning
BUG64201, BUG64763:  configuration changes not taking effect until reboot (potential fix).
BUG65105:  when using 1 to 1 Nat IP ranges configuration saves may causes packet loss, connection count increase and one way BOVPN tunnel traffic.


Description of v11.5.1 files available for download:

XTM_OS_2050_11_5_1.exe   -- appliance firmware to install sysa-dl file on your PC to upload to the 2050 using  
policy manager or the WebUI

XTM_OS_1050_11_5_1.exe   -- appliance firmware to install sysa-dl file on your PC to upload to the 1050 using  
policy manager or the WebUI

XTM_OS_XTM8_11_5_1.exe   -- appliance firmware to install sysa-dl file on your PC to upload to the XTM 8-series  
using policy manager or the WebUI


XTM_OS_XTM5_11_5_1.exe   -- appliance firmware to install sysa-dl file on your PC to upload to the XTM 5-series  
using policy manager or the WebUI

XTM_OS_XTM330_11_5_1.exe   -- appliance firmware to install sysa-dl file on your PC to upload to the XTM 3-series  
using policy manager or the WebUI


XTM_OS_XTM2_11_5_1.exe   -- appliance firmware to install sysa-dl file on your PC to upload to the XTM 2-series  
using policy manager or the WebUI