Fireware XTM v11.2.3 CSP6

For XTM 1050, 8-series, 5-series, 2-series,  e-series Edge, e-series Core/ Peak

Appliance Build # 276730
WSM Build # 271716

WSM v11.2.3 or higher is needed to manage a Firebox running Fireware XTM 11.2.3 CSP6.
WSM v11.2.3 Build # 271716 is needed to resolve Bug 44368: ability to monitor VLAN interfaces in Firecluster


Resolved Issues:

Appliance

BUG41504: Quarantine connections are not cleaned up in the SM table 
BUG44028: Https proxy memory leak
BUG44261,BUG26060,BUG31356 -  mail sent from mail servers behind SonicWall firewall randomly fails through SMTP proxy.  Issue only occurs on e-series Edge and 2 Series.
BUG44256: SSLvpn user doesn't show as logged out on the Firebox after the sslvpn client disconnect 
BUG41664: IPS server protection performance is improved to prevent management connection from failing under high traffic situations.   
BUG44025: Some Blocked sites not showing in FSM UI when the number of blocked sites is over 100
BUG44293: Server Load Balancing improperly marking servers as down
No Bug :  Number of concurrent proxy connections increased on XTM 1050 and XTM 8
BUG44474: Proxies fail after configuration save
BUG42579: Nessus scan causes 1050 to become unresponsive
BUG44368: ability to monitor physical VLAN interfaces in FireCluster 
BUG44525: Secondary 1-1NAT fails in a firecluster setup 
BUG44178: XTM5 and XTM8 VPN performance improvements for TCP traffic
BUG45137: Causing cluster failover by unplugging VLAN interface will interrupt traffic flow
BUG42685, 42549, 45210:  after upgrade appliance keeps rebooting into recovery mode.  LCD often shows “recovWatchGuard”
BUG44259: Active /Passive failover speed has been improved. 
BUG40607: Global 1 -1 NAT does not work with VPN traffic
BUG44945: H.323 Proxy - Media channel time out causes video conference to drop after 600 seconds
BUG44950: Increased received packet buffer on NIC cards to improve performance with a high rate of small packets
BUG44667: 11.2.3 FireCluster A/P connections failing for 1-to-1 NAT entries
BUG44956: Retrieving support.tgz halts all traffic and management connections



WatchGuard System Manager (WSM)

BUG44368: ability to monitor physical VLAN interfaces in FireCluster




Description of v11.2.3 files available for download:


XTM_OS_Core_Peak_11_2_3.exe  -- appliance firmware install that will put the .wgu and sya-dl file on your PC for use by Policy Manager or WebUI

XTM_OS_Edge_11_2_3.exe  -- appliance firmware install that will put the edge sys-dl file on your PC for use by Policy Manager or WebUI

XTM_OS_1050_11_2_3.exe   -- appliance firmware to install 1050 sysa-dl file on your PC to upload to the 1050 using
policy manager or the WebUI

XTM_OS_XTM2_11_2_3.exe   -- appliance firmware to install sysa-dl file on your PC to upload to the XTM 2-series using policy manager or the WebUI

XTM_OS_XTM5_11_2_3.exe   -- appliance firmware to install sysa-dl file on your PC to upload to the XTM 5-series using policy manager or the WebUI

XTM_OS_XTM8_11_2_3.exe   -- appliance firmware to install sysa-dl file on your PC to upload to the XTM 8-series using policy manager or the WebUI

edge_11_2_3.exe  -- edge upgrade file from v10.2.9 or higher 10.2.x to v11.2.3CSP  This file will convert your v10.2.9 or higher configuration during upgrade

utm_core_peak.down2fw.sysa-dl  -- downgrade file for core/peak.  If you need to downgrade to v10.2.8 use this file from the v11.2.3 Policy Manager