Fireware XTM v11.3 CSP3

For XTM 1050, 8-series, 5-series, 2-series,  e-series Edge, e-series Core/ Peak

Appliance Build # 281675
SSLVPN client Build # WGv1.6

WSM v11.3 or higher is needed to manage a Firebox running Fireware XTM 11.3 CSP.


Resolved Issues:

	BUG44945: H.323 Proxy media channel timeout causes calls to drop after 900 seconds 
	No bug ##: CAD blocked issue 
	BUG44956: Retrieving support.tgz during high # of concurrent connections halts all traffic and management connections 
	BUG44067: stack trace found with https proxy traffic 
	BUG44970: sigd process stack trace 
	BUG44893: IE sometimes displays "friendly HTTP error message" instead of Webblocker deny message 
	BUG44307: IE can't display the deny message page when the  http "GET" action is set to "deny" 
	BUG45226: Improvements to proxy health monitoring to restart stuck proxy process 
	BUG44906: GAV and webblocker should not show unneeded errors  logs 
	BUG45252: cfm should validate the connection from conn id before sending the av scan result 
	BUG45251: running ftp+gav under high stress results in 'error processing scanning results' messages 
	BUG45031: modify proxy server in spamblocker causes a stack trace
	BUG55728: Cluster instability issue under heavy connection load
	TSK55797: potential deadlock in wglog process
	BUG55798: Firecluster: two members have different connection counts after role change at high volume of connections
	BUG45464: Stack trace occurs in cluster due to high concurrent connections
	BUG55663,55693,44786, 55794, CFM stack traces
	BUG55676: Loggerd executed stack trace
	BUG55819: live security rss sync not working
	BUG44887: Auth and MoVPN failing with log message:”wgcgi timeout after prcs msg error” 
	BUG56043: proxy traffic stops when AV enabled. boot log shows : "AV initialization failed"
	BUG55737: Traffic Intermittently fails between bridged interfaces
	BUG56012: 1000 in xt_session module fails to add session 
	BUG44178: XTM5 and XTM8 VPN throughput improvements for TCP traffic
	BUG56022: 200 OK dropped when SDP contains media port 0
	BUG56207: TCP data can get corrupted in transmission for proxies
	BUG40829: Inbound SMTP Proxy not passing certain emails with PDF attachements
	BUG55764: SSLVPN license not allowing more than 5 users on xtm23 wired


Windows SSLVPN client:
BUG41273: SSL VPN client dose not connect with TAP driver if local user not admin

Description of v11.3CSP files available for download:


XTM_OS_Core_Peak_11_3.exe  -- appliance firmware install that will put the .wgu and sya-dl file on your PC for use by Policy Manager or WebUI

XTM_OS_Edge_11_3.exe  -- appliance firmware install that will put the edge sys-dl file on your PC for use by Policy Manager or WebUI

XTM_OS_1050_11_3.exe   -- appliance firmware to install 1050 sysa-dl file on your PC to upload to the 1050 using
policy manager or the WebUI

XTM_OS_XTM2_11_3.exe   -- appliance firmware to install sysa-dl file on your PC to upload to the XTM 2-series using policy manager or the WebUI

XTM_OS_XTM5_11_3.exe   -- appliance firmware to install sysa-dl file on your PC to upload to the XTM 5-series using policy manager or the WebUI

XTM_OS_XTM8_11_3.exe   -- appliance firmware to install sysa-dl file on your PC to upload to the XTM 8-series using policy manager or the WebUI

edge_11_3.exe  -- edge upgrade file from v10.2.9 to v11.1CSP  This file will convert your v10.2.9 configuration during upgrade

utm_core_peak.down2fw.sysa-dl  -- downgrade file for core/peak.  If you need to downgrade to v10.2.8 use this file from the v11.1 Policy Manager

WG-MVPN-SSL.exe  -- Windows SSLVPN client


George Grinnell | Director, Technical Support
WatchGuard Technologies, Inc. | www.watchguard.com 
206.521.3562 Direct
. . . . . . . . . . . . . . . . . . . . . . . .
Get red. Get secured