Fireware XTM v11.6.1 CSP3 For XTM 2050, 1050, 8-series, 5-series, 3-Series, 2-series Appliance Build # 354688 WSM v11.6.1 or higher is needed to manage a Firebox running Fireware XTM 11.6.1 CSP. 11.6.1 CSP releases are cumulative. ftp://ftp.watchguard.com/11.6.1_CSP/ username: XTM_CSP password: S0NofTr1ton Resolved Issues: CSP1 (Build# 350391) BUG66975: FSM traffic monitor shows blank due to log entries without seq attribute BUG65521: unnecessary firewalld error message in appliance log BUG66635: Unnecessary log message - 2012-05-02 11:25:56 firewall block_dump: Select timed out Debug BUG65537: Change in Policy Schedule does not stop existing proxy session BUG67116: MultiWAN - Outbound PBR failure with default settings - Interface not down. BUG68127: Cross site scripting vulnerability using login Failure from FW Auth Server on 4100 and SSLVPN BUG68026: BUG66200: Slow Kernel Memory Leak caused by BOVPN BUG68163: No BOVPN tunnel route due to probable iked failure to learn a new dynamic ip BUG68188: BOVPN failure with dynamic IP site due to inconsistent DNS name resolution BUG68237: iked crashes in ike_config_set_policy BUG67961: iked died unexpectedly on signal 11 BUG66772: IKED stack trace occurring when disconnecting MoVPN IPSec (Safenet Client) connection BUG68247: Tunnels may fail after upgrade BUG68886: High CPU usage with high number of BOVPN tunnels. BUG67927: Active / Active mode cluster load balance does not work after health index is lower on one box BUG67447: WebBlocker fails with logs "failed to send server-request" BUG68344: SSO exceptions list will trigger when the last octet of the IP is in the exception BUG65288: kernel crash and reboot BUG66872: A/P Cluster Member reboots kernel BUG at /builds/utm-11_5_3/src/340457/ip_set.c:507 EIP e033af7d BUG66809: A/P Cluster Master reboots kernel BUG at /builds/utm-11_5_3_csp/src/341451/EIP: ec2b9f59 BUG65179: Interface traffic stopped EIP: EFLAGS: 00010246 CPU:3 BUG67994: loggered crash EIP: 0060:[] box reboots BUG67866: Kernel crash and reboot (EIP: e034df64) BUG66670: XTM1050 reboot with crash log EIP:0060:[]EFLAGS:00010246 CPU:1 BUG68302: XTM8 locking up and rebooting CSP2 (Build# 352335) BUG68090: static routes lost, when PPPoE interface goes down BUG68183: Multi-WAN Failover Mode PPPoE/Static not working. Default path missing + incorrect DNAT BUG68986: the "Ip range" style for SSO exception doesn't work BUG68370: Cluster member crashes after several successive failovers BUG68650: kernel Crash when test HTTP Packet filter + IPS and APP on XTM26 BUG69050: kernel crash and reboot EIP ec1c96cb EIP is at br_netfilter_fini+0x221/0x26e [bridge] BUG65848: Customer's active FTP is not working BUG67666: AP scan (Rogue AP Detection "Scan Now") crashes the kernel with Wireless WAN BUG68298: Traffic be interrupted when wireless connection occurs on External BUG66032: XTM2 Wireless will run 1 -2 hours then will lockup with Wireless WAN enabled BUG68232: With multiwan, DHCP wan interface become down logically, PPPoE interface will down for 1mins CSP3 (Build# 354688) BUG69616: The dynamic IP at peer side is not added into the local cache file at multi-wan BUG69351: After reboot multiple Phase 1 one time outs occurred. Unable to build VPN tunnels. BUG69624: Limit rate of phase one auto start after reboot BUG69377 Incorrect model number displayed with MODEL 505 license BUG69625: iked crash sig 6, sig 11 BUG68554: Interface failing to route and not listing 'inet addr' in status report > interfaces BUG68312: SIP proxy causes CFM restart due to memory cap violation BUG67656: Process `cfm.5' with pid: 1515 / tid: 1515 died unexpectedly on signal 6 (SIP) BUG67479: CFM Stack traces using SIP after upgrading from 11.4.2 to 11.5.3U1 using existing setup BUG67782: cfm.2 stacktrace, SIP (stack contents @ 0xbe836430), signal 6 BUG67001: BOVPN over 1:1 NAT fails with multiWAN causes one way traffic (inbound fails) BUG68944: VPN 1:1 nat does not work when we use it on multiwan(3 pppoe and 1 dhcp)xtm box BUG69090: VPN tunnel fails and stops passing traffic - xfrm_dst_cache value exceeded in slab info BUG67819: memory leak causing xfrm_dst_cache value to increase and causing appliance to lockup BUG69351: After reboot multiple Phase 1 one time outs occurred. Unable to build VPN tunnels XTM2050 WSM (WatchGuard System Manager) CSP1 (build # 348296) BUG68447: 11.6.1 management server fails to apply 11.3.x template to fully managed 11.3.x device Description of v11.6.1 CSP files available for download: XTM_OS_2050_11_6_1.exe -- appliance firmware to install sysa-dl file on your PC to upload to the 2050 using policy manager or the WebUI XTM_OS_1050_11_6_1.exe -- appliance firmware to install sysa-dl file on your PC to upload to the 1050 using policy manager or the WebUI XTM_OS_XTM8_11_6_1.exe -- appliance firmware to install sysa-dl file on your PC to upload to the XTM 8-series using policy manager or the WebUI XTM_OS_XTM5_11_6_1.exe -- appliance firmware to install sysa-dl file on your PC to upload to the XTM 5-series using policy manager or the WebUI XTM_OS_XTM330_11_6_1.exe -- appliance firmware to install sysa-dl file on your PC to upload to the XTM 330 using policy manager or the WebUI XTM_OS_XTM330_11_6_1.exe -- appliance firmware to install sysa-dl file on your PC to upload to the XTM 33 using policy manager or the WebUI XTM_OS_XTM2_11_6_1.exe -- appliance firmware to install sysa-dl file on your PC to upload to the XTM 2-series using policy manager or the WebUI XTM_OS_XTM2A6_11_6_1.exe -- appliance firmware to install sysa-dl file on your PC to upload to the XTM25 and XTM26 using policy manager or the WebUI xtmv_11_6_1.ova -- file to do initial installation of XTMv XTM_OS_XTMV_11_6_1.exe - file to upgrade an existing XTMv installation