Fireware XTM v11.2.1 CSP1

For XTM 1050, 8-series, 5-series, 2-series,  e-series Edge, e-series Core/ Peak

Build # 263885


WSM v11.2 or higher is needed to manage a Firebox running Fireware XTM 11.2.1 CSP.


Resolved Issues:


BUG42709: Trusted interface not forwarding DNS queries  e-series Edge
BUG42665: UDP Flood port 0 - causes loss of Management connection 
BUG42792: Rebooting Firecluster master puts cluster in an unknown state that will not pass any packets 
BUG42770: SM channel leak with no proxy actions loaded 
BUG42680: Mails get blocked as Spam from sender being in the exception list
BUG42899: Secondary IP address limitations
BUG42760: Enabling Trusted I/F speed cap max bandwidth on external to the limit
BUG41512: Drop-in mode failure after upgrade from 10.2.x to 11.x
BUG43269: WGLOG should support to log the name of the policy
BUG43355: FSM status report retrieve breaks FSM connection
CL260640: adjust timeout for system requests during cluster forming, continue send join through other ports in case of error instead of quit
BUG43657: CFM Stack Trace on XTM1050 - eip: 0xb7826e2d
BUG43370: Iked stops responding on 1050 cluster using managed tunnels
BUG43592: iked crashed when high number of BOVPN tunnels cannot be established after WAN failover
 



Description of v11.2.1 files available for download:


XTM_OS_Core_Peak_11_2_1.exe  -- appliance firmware install that will put the .wgu and sya-dl file on your PC for use by Policy Manager or WebUI

XTM_OS_Edge_11_2_1.exe  -- appliance firmware install that will put the edge sys-dl file on your PC for use by Policy Manager or WebUI

XTM_OS_1050_11_2_1.exe   -- appliance firmware to install 1050 sysa-dl file on your PC to upload to the 1050 using
policy manager or the WebUI

XTM_OS_XTM2_11_2_1.exe   -- appliance firmware to install sysa-dl file on your PC to upload to the XTM 2-series using policy manager or the WebUI

XTM_OS_XTM5_11_2_1.exe   -- appliance firmware to install sysa-dl file on your PC to upload to the XTM 5-series using policy manager or the WebUI

XTM_OS_XTM8_11_2_1.exe   -- appliance firmware to install sysa-dl file on your PC to upload to the XTM 8-series using policy manager or the WebUI

edge_11_2_1.exe  -- edge upgrade file from v10.2.9 to v11.1CSP  This file will convert your v10.2.9 configuration during upgrade

utm_core_peak.down2fw.sysa-dl  -- downgrade file for core/peak.  If you need to downgrade to v10.2.8 use this file from the v11.1 Policy Manager