Fireware XTM v11.3.2 CSP1

For XTM 1050, 8-series, 5-series, 2-series,  e-series Edge, e-series Core/ Peak

Appliance Build # 292263
WSM build # 291640


WSM v11.3.2 or higher is needed to manage a Firebox running Fireware XTM 11.3.2 CSP.


Resolved Issues:

Appliance:

56997: MSRP File-xfer fails on hairpin 
55908: HTTPS proxy no longer shows support for SSlv2
56956: ID field of IP header after ESP encapsulation is not changed in the IP fragmentation case 
55998: system CPU utilization high until change made to WB setting
56331: cfm worker2 (webblocker) spinning 
56737: H.323 ALG – high CPU usage
 

WSM:

RFE57122: Report for bandwidth utilization for external interfaces in Mbit/sec 
RFE57127: Detail section of most popular domain report sorted in Mbytes
RFE57128: Detail section of most active clients report sorted in Mbytes









Description of v11.3.2 CSP files available for download:


WSM11_3_2s.exe  --   WatchGuard System Manager.   ** note if installing on a PC with WSM 11.3.2 already installed you will need to unstall WSM11.3.2 before installed 11.3.2 CSP.

XTM_OS_Core_Peak_11_3_2exe  -- appliance firmware install that will put the .wgu and sya-dl file on your PC for use by Policy Manager or WebUI

XTM_OS_Edge_11_3_2.exe  -- appliance firmware install that will put the edge sys-dl file on your PC for use by Policy Manager or WebUI

XTM_OS_1050_11_3_2.exe   -- appliance firmware to install 1050 sysa-dl file on your PC to upload to the 1050 using
policy manager or the WebUI

XTM_OS_XTM2_11_3_2.exe   -- appliance firmware to install sysa-dl file on your PC to upload to the XTM 2-series using policy manager or the WebUI

XTM_OS_XTM5_11_3_2.exe   -- appliance firmware to install sysa-dl file on your PC to upload to the XTM 5-series using policy manager or the WebUI

XTM_OS_XTM8_11_3_2.exe   -- appliance firmware to install sysa-dl file on your PC to upload to the XTM 8-series using policy manager or the WebUI

edge_11_3_2.exe  -- edge upgrade file from v10.2.9 to v11.1CSP  This file will convert your v10.2.9 configuration during upgrade

utm_core_peak.down2fw.sysa-dl  -- downgrade file for core/peak.  If you need to downgrade to v10.2.8 use this file from the v11.1 Policy Manager

WG-MVPN-SSL.exe  -- Windows SSLVPN client


George Grinnell | Director, Technical Support
WatchGuard Technologies, Inc. | www.watchguard.com 
206.521.3562 Direct
. . . . . . . . . . . . . . . . . . . . . . . .
Get red. Get secured