Fireware XTM v11.1 CSP2 

For XTM 1050, e-series Edge, e-series Core/ Peak and 8-series

Build # 252069 - for XTM 1050, e-series Fireboxes
Build # 252004 - for 8-series Fireboxes

WSM v11.1 or higher is needed to manage a Firebox running Fireware XTM 11.1 CSP.


Resolved Issues:

BUG41248: Selecting third-party certificate for web server fails and breaks WSM connections 
BUG41261: active BOVPN tunnel cause cluster formation fail 
BUG41327: cfm worker1 stack trace with pop3 proxy and services enabled 
BUG40418: Wireless constantly crashes with networkd stack trace
BUG41281: FireCluster IP address (HA) not taking correct subnet mask for one of the members
BUG41373: IPSec passthru fails thru Firebox in A/P cluster
BUG41489: DF bit functionality for IPSec Traffic not working
BUG41483: HTTP line parsing error for FTP caching proxy traffic
BUG41432: x5500 random networkd stack trace causing reboot or lockup
BUG41556: Server Load Balancing will not work if 2 policies have the same SLB entry
BUG41124: Enabling FireCluster causes sessiond to crash
BUG41388: Using vlan on external with firecluster will cause the firebox to reboot constantly
RFE40159: Add better crash debugging logs in support.tgz
BUG41719: host added to the blocked sites list when matching proxy deny event even with a blocked site exception
BUG41530: Intra-interface routed network traffic disrupted when cluster A/P is enabled
BUG40772: Hostwatch show blank with a high number of proxy connections
BUG41677: BOVPN Failover Not completing between Edge and Core appliance 

 

 






Description of v11.1 files available for download:

edge_11_1.exe  -- edge upgrade file from v10.2.9 to v11.1CSP  This file will convert your v10.2.9 configuration during upgrade

XTM_OS_Core_Peak_11_1.exe  -- appliance firmware install that will put the .wgu and sya-dl file on your PC for use by Policy Manager or WebUI

XTM_OS_Edge_11_1.exe  -- appliance firmware install that will put the edge sys-dl file on your PC for use by Policy Manager or WebUI

XTM_OS_1050_11_1.exe   -- appliance firmware to install 1050 sysa-dl file on your PC to upload to the 1050 using policy manager or the WebUI

utm_core_peak.down2fw.sysa-dl  -- downgrade file for core/peak.  If you need to downgrade to v10.2.8 use this file from the v11.1 Policy Manager