Fireware XTM v11.3.2 CSP3

For XTM 1050, 8-series, 5-series, 2-series,  e-series Edge, e-series Core/ Peak

Appliance Build # 303432
WSM build # 291640


WSM v11.3.2 or higher is needed to manage a Firebox running Fireware XTM 11.3.2 CSP.


Resolved Issues:

Appliance:

CSP1
56997: MSRP File-xfer fails on hairpin 
55908: HTTPS proxy no longer shows support for SSlv2
56956: ID field of IP header after ESP encapsulation is not changed in the IP fragmentation case 
55998: system CPU utilization high until change made to WB setting
56331: cfm worker2 (webblocker) spinning 
56737: H.323 ALG – high CPU usage

CSP2
56422: Eth4, 5, 6 on 2-series will not reply to arp if cable disconnected for 24 hours and reconnected
58120,57418: SSL/AD authentication request not processed through bovpn anymore after upgrade from 11.3.1 
58119,57701: SSO Authentication request from firebox not passed through VPN tunnel, instead using ext. IP 
58117,57702: WG Log/Syslog traffic from firebox not passed through VPN tunnel, instead using ext. IP
57453: IKED Stack Trace EIP: 0xb7763384 after upgrade from 11.3.1 to 11.3.2 
58422: PPTP disconnects after 1-2 minutes; Logs - pppd Unsupported protocol 0xc8cb received Debug 
58424: Traffic Management Actions in BOVPN Policies does not work as it did in Version 10 

CSP3
57438:  Server Load Balancing not working with RDP
58811:  Failover does not occurr with multi-wan and both interfaces using PPPoE
58900:  PPPoE may not reconnect for 15 - 20 minutes after reboot
57506:  cfm stack traces 
56399:  MUVPN address pool which is part of the drop-in network will not be able to reach internal 
58783:  The same net can not visit the other PC when it is under pptp drop-in mode
55711:  SSLVPN address pool which is part of the drop-in network will not be able to reach internal




WSM:

CSP1
RFE57122: Report for bandwidth utilization for external interfaces in Mbit/sec 
RFE57127: Detail section of most popular domain report sorted in Mbytes
RFE57128: Detail section of most active clients report sorted in Mbytes



Description of v11.3.2 CSP files available for download:


WSM11_3_2s.exe  --   WatchGuard System Manager.   ** note if installing on a PC with WSM 11.3.2 already installed you will need to unstall WSM11.3.2 before installed 11.3.2 CSP.

XTM_OS_Core_Peak_11_3_2exe  -- appliance firmware install that will put the .wgu and sya-dl file on your PC for use by Policy Manager or WebUI

XTM_OS_Edge_11_3_2.exe  -- appliance firmware install that will put the edge sys-dl file on your PC for use by Policy Manager or WebUI

XTM_OS_1050_11_3_2.exe   -- appliance firmware to install 1050 sysa-dl file on your PC to upload to the 1050 using
policy manager or the WebUI

XTM_OS_XTM2_11_3_2.exe   -- appliance firmware to install sysa-dl file on your PC to upload to the XTM 2-series using policy manager or the WebUI

XTM_OS_XTM5_11_3_2.exe   -- appliance firmware to install sysa-dl file on your PC to upload to the XTM 5-series using policy manager or the WebUI

XTM_OS_XTM8_11_3_2.exe   -- appliance firmware to install sysa-dl file on your PC to upload to the XTM 8-series using policy manager or the WebUI

edge_11_3_2.exe  -- edge upgrade file from v10.2.9 to v11.1CSP  This file will convert your v10.2.9 configuration during upgrade

WG-MVPN-SSL.exe  -- Windows SSLVPN client